- Home
- adv
- Electrical Power
- Electrical Testing
- Cable & Fault Location Test
- Megger VLF Sine Wave 34 kV | PORTABLE VLF SINE WAVE TEST SYSTEM
- adv
- Megger VLF Sine Wave 34 kV | PORTABLE VLF SINE WAVE TEST SYSTEM
-
Electrical Power
- Electrical Protection & Control
-
Electrical Testing
- Battery Testing
- Cable & Fault Location Test
- Circuit Breaker Testing
- Contact Resistance Testing
- Earth and Ground Tester
- General Tester
- HV Test Set AC, DC and AC/DC
- Insulation Test
- Primary Injection Testing
- Protective Relay Testing
- Instrument & Power Transformers Testing
- Motor Testing & Monitoring
- Partial Discharge Testing & Monitoring
- Metering & Panel Accessories
- SCADA & Automation
- Transformer and Breaker Monitoring & Diagnostic
- Substation Cameras
-
Advanced Automation Applications
-
Data Communication Network
Megger VLF Sine Wave 34 kV | PORTABLE VLF SINE WAVE TEST SYSTEM
The VLF sine wave 34 kV is a multi-purpose device: it can be used for cable testing, sheath testing, and in combination with the optional step voltage probe ESG NT2, for sheath fault pinpointing.
- High test capacity of 5 µF
- Suitable for outdoor use (IP 54)
- Single-button operation
- Integrated safety system
- Reporting
- Continuous duty cycle
The VLF sine wave 34 kV is a compact, robust and portable VLF sine wave test system for medium voltage cables.
The design, optimized for rapid transportation and quick setup, and the continuous duty cycle are two attributes that qualify the system
as an ideal tool for routine cable testing. For both 0.1 Hz sine wave voltage tests and rectangular or DC voltage tests, the VLF sine wave 34 kV fills the highest demands on the test voltage quality and stability. Moreover, the integrated "breakdown detection" shuts down the test voltage in the event of an excessive charge current and guarantees limited damage to the cable.
Consistent single-button operation combined with a sophisticated operating concept allows a fast and targeted use of the system.
The design, optimized for rapid transportation and quick setup, and the continuous duty cycle are two attributes that qualify the system
as an ideal tool for routine cable testing. For both 0.1 Hz sine wave voltage tests and rectangular or DC voltage tests, the VLF sine wave 34 kV fills the highest demands on the test voltage quality and stability. Moreover, the integrated "breakdown detection" shuts down the test voltage in the event of an excessive charge current and guarantees limited damage to the cable.
Consistent single-button operation combined with a sophisticated operating concept allows a fast and targeted use of the system.
FEATURES
- Testing without operational interruptions
- AC testing in compliance with DIN VDE, EN, IEEE
- Compact, rugged, lightweight, and IP 54 for transportation
- Sheath testing and sheath fault pin-pointing acc. to IEC 60229
- Maximises user safety through automatic discharge of the test object and earth loop ground monitoring
- Breakdown detection and load recognition (R, C)
- Quick & easy logging, and updates via USB port
Output voltage
| VLF sine wave | 0 … 24 kV RMS / 0 ... 34 kV peak |
| DC voltage | ± 0 … 34 kV |
| VFL rectangular voltage | 0 … 34 kV |
| Precision | ± 1 % |
| Resolution | 0.1 kV |
Output current
| Measuring range | 0 … 14 mA |
| Precision | ± 1 % |
| Resolution | 1 μA |
General
| Frequency range | 0.01 Hz ... 0.1 Hz autom. frequency adjustment |
| Output | 0.6 μF @ 0,1 Hz at 24 kV RMS 5 μF @ 0,01 Hz at 21 kV RMS |
| Input voltage | 100 V … 260 V, 50/60 Hz, 400 VA |
| Sheath testing | 0 … 5 kV, 0 … 10 kV DC |
| Sheath fault pinpointing | 0 … 5 kV, 0 … 10 kV DC, Pulse rate 1:3 and 1:4 |
| Safety | Earth loop ground monitoring, autom. discharging of the test object |
| Dimensions (W x H x D) | 520 x 450 x 300 mm |
| Weight | 25 kg |
| Protection class | IP 20/IP 54 (operation/transportation) |
| Operating temperature | - 20 °C … + 55 °C |
| Storage temperature | - 25 °C … + 70 °C |
How can we help you?
Type the keywords in the form
and we will find it for you.