BriteSpot G3 TM Module
The BriteSpot probe is intended to be mounted in locations difficult to access or extremely critical by utilizing dielectrically invisible fiber optic probes to measure and record real-time temperature data. The probes are intended to be mounted under bolted connections on bus bars, splices, cable connections or any source of resistive heating. The most obvious benefit comes from the realtime nature of the data at inaccessible and/or unsafe locations. In addition, the accuracy of the probes is not subject to operator errors and equipment incompatibility as is the case with infrared scanning.
Data from the G3 can be accessed via Serial MODBUS, TCP/IP MODBUS, or Ethernet /IP industrial protocols. Data logs are stored onboard the G3, providing up to 100 years of logging which can easily be downloaded via a standard Ethernet connection. An internal web interface is easily accessible for customizing product settings. (e.g.; comms, logging intervals, units of measure, time sync, etc.)
The G3 is equipped with a data processing feature intended to drastically simplify decision making. No longer do you need to worry about interpretation of raw data, simply install the sensors and monitor a single ThermAlert TM register. The G3 will collect, interpret, and archive the data and alert you only when action needs to be taken. Ideally suited for locations that are both challenging to access and prone to thermal issues, including:
- LV & MV Switchgear
- LV & MV MCC
- Switchboards
- Disconnect Switches
- Transformers
- Bus Ducting
- Fan-Cooled Circuits
- Capacitor Banks
- LV & MV Switchgear
- LV & MV MCC
- Switchboards
- Disconnect Switches
- Transformers
- Bus Ducting
- Fan-Cooled Circuits
- Capacitor Banks
